Convert your design created in Civil3D, Microsurvey, Carlson etc into a file suitable for use on a Trimble Tractor using Field Level II Format.
The cost is US$200 (AUD$250 inc GST). No need to pay until your design is converted and you are happy with the result
Here are some common formats that you can send us:
- A Topcon .tp3 file.
- A Trimble SVD and SVL file. Also send a list of benchmarks with coordinates.
- From Acad Civil - A landxml file with benchmarks, strings and surfaces.
- We can take a dwg/dxf but please no proxy elements. We can't use them. Surfaces must be as "3D Faces".
As a guide we need the following:
- We need a Master Bench point in coordinates or Lat/Lon coordinates.
- We need the coordinates sytem. If it is State Plane then please tell us the zone.
- We need an optional list of benchmarks. In eastings and northings.
- We need an optional series of lines that are displayed on the monitor.
- We need a design surface. Either defined as a series of eastings/northings or triangulated surface.
- We need an optional natural surface. Either defined as a series of eastings/northings or triangulated surface.
- Possible format's include dwg, dxf, landxml, csv. Contact us if you have a different format.
Email us at info@foresoft.com to get started
The screen-shot below show's an example of a Civil Design we have converted.